VCAT-2 Vibration Analysis ISO18436-3
VCAT-2 is for those who have mastered the basics and are collecting data, diagnosing a range of fault conditions and giving recommendations for corrective action.
Description
Learn to be an effective vibration analyst - capable of diagnosing a wide range of faults, conducting special tests, and performing precision aligning and balancing.
In this course you will:
• Increase your knowledge on maintenance practices, condition monitoring, and the common condition monitoring technologies
• Increase your knowledge about data collection, testing
techniques, sensor types, etc.
• Learn a great deal about signal processing and the settings of your vibration analyzer
• Increase your knowledge of spectrum analysis, time waveform analysis, and phase analysis
• Understand why phase analysis and time waveform analysis are both critical tools used by the vibration analyst
• Learn about common failure modes and how to detect them, including unbalance, misalignment, looseness, resonance, pump/fan/compressor vane, and flow issues, cavitation, turbulence, gearbox failures, rolling
element bearing failure, and more
• Learn about high-frequency bearing and gear fault detection techniques: demodulation, enveloping, SPM, HD, shock pulse, PeakVue, Spike Energy, and others
• Be able to use spectra, phase readings, time waveforms, bump and impact tests, to test for looseness, resonance, and other conditions
• Learn about precision shaft alignment and soft foot correction
• Learn about single and two-plane balancing
• Learn the basics of setting alarm limits: band alarms and mask/envelope alarms.
The key is that with the VCAT-II course, you will transition from being a person who is primarily capable of collecting data to a person who can diagnose faults on critical machinery, and in some cases, prevent or
correct them.
Download course content from here: https://reliabilityinstitute.com.au/brochures/
With this video-based course, your learning occurs independently, which allows you to participate in the training at your speed and your convenience
Certification Exam:
The exam can be applied for after course completion.
MIBoC certification exams should be taken at a MIBoC Authorized Examination Centre (AEC).
However, if a student is unable to attend an AEC, they may be eligible to apply to MIBoC to take the exam using the Independent Invigilated Online Exam method.
There is no time limit to sit the exam after course completion.
For more information visit: https://www.mobiusinstitute.com/miboc-certification-exam/
Fee
VCAT II cost per student: AUD $3,800 + 10% GST = $4,180
Includes:
- 4 months on-line course access
- Colour Printed Course Manual with FREE express delivery.
Prerequisites
Anyone can do the course, however VCAT II Certification Requires:
- Training course completed.
- Passing 3-hour, 100 question multiple choice, closed book exam with minimum 70%.
- 18 months of work experience, verified by an independent person.